Lincmaster Plant Security

Breaker

A locking pin system specifically designed to secure all attachments to your Mini Excavator and Backhoe Loader when left on site out of hours.

The LINCMASTER Breaker and Attachment Lok is designed as a means of locking an hydraulic breaker, bucket, post hole borer etc... to a Mini Excavator or Backhoe Loader when left on site out of working hours.

As with all of the other LINCMASTER products you can expect to see a serious reduction in the incidence and cost of theft along with potential savings in insurance premiums.

Each unit comes in two parts - a replacement pin and a lock 'block' complete with the Lincmaster high security locking barrel and three keys. The pin supplied replaces the existing pin to attach the hydraulic breaker, bucket or other attachment to the dipper arm of the machine. It will, in all circumstances, be similar to the existing dipper arm pins, with the additional ability of being able to accept the locking block, and during normal working conditions will be held in place by the normal retainer.

At the end of the working day the locking block is placed on the pin and locked into position, preventing the unauthorised removal of the pin and thus the Hydraulic Breaker or other attachment. Before restarting work, the lock block is disengaged, removed and the pin is again held in position by its usual retainer.

All pins will pertain to the type and make of the machine although the locking blocks are interchangeable. Locking blocks will come complete with the proven high security ten pin locking barrel boasting over 1 million combinations.

ABA001 Breaker Lok JCB 1CX
ABA002 Breaker Lok JCB 2CX - 28 / 30mm
ABA003 Breaker Lok JCB 3CX/4CX - 44mm
ABA004 Breaker Lok 580K
ABA005 Breaker Lok 50HXS
ABA006 Breaker Lok MF 800 series
ABA007 Breaker Lok Pel-Job 12.4 Sirius
ABA008 Breaker Lok Pel-Job 25.4
ABA009 JCB 801.